No. 280 Bait Caster / Spinning Rod Holder - Side/Deck Mount
 |
 |
 |
Click on Images to Enlarge |
Holds a bait caster reel in a cushioned cradle.
A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol
grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Click on Images to enlarge
(No. 280 Bait Caster shown with bait caster reel in a cushioned cradle. The slot in the front of the rod holder also allows for a spinning reel to be held securely in position.)
Includes No. 241 Combination Side/Deck Mount which allows mounting on a flat deck surface or on the side of a gunnel or transom.
Mount Dimensions: 4" x 2" x 2"
Bolting Dimensions: 1 5/16" x 3 3/16"
No. 281 Bait Caster / Spinning Rod Holder - Flush Mount
Click on Image to Enlarge
Includes a No. 244 Flush Deck Mount which has a sealed base for watertight applications (such as kayak decks).
Mount Dimensions: 4"x 2" x 2"
Bolting Dimensions: 1 5/16" x 3 3/16"
No. 389 Bait Caster with Portable Clamp Mount
Click on Image to Enlarge
Includes No. 449 Portable Clamp Mount for complete portability.
The No. 449 Portable Clamp Mount is made from super tough, reinforced engineering grade nylon. This powerful clamp has a maximum 2" opening, and is a popular mounting choice for canoes, tin boats and even dock rails.
The mount includes the stainless steel fasteners required to mount the rod holder to the portable clamp.
No. 481 Bait Caster with Compact Threaded Deck Mount
Click on Image to Enlarge
Includes No. 444 Compact Threaded Deck Mount which fits gunnels up to 2" thick. Secures with no exposed hardware using provided nylon nut. Comes with cap to seal the bottom.
« Back |
